1.Introduction of the LCD Module TX18D11VM1CAA Original 7" STN LCD
This module is a 7" TFT with 3 by 4 format,which is composed of amorphous silicon.Each sub-pixel (dot) on the LCD is vertical stripe type arranged as R (red), G (green), B (blue) color sequentially.The bounding technology, COG (chipi on glass), and LED backlight design have been applied on this displa RoHS compliant.
Display for Industrial Machine
Measuring Instrument, Chart Recorder, Scale
POS, ATM, Bank Terminal
Fish Finder, Musical Instrument, Sewing Machine
Copier Machine, FAX
2.Specification of the LCD Module TX18D11VM1CAA Original 7" STN LCD
Panel Brand: |
HITACHI |
Panel Model: |
TX18D11VM1CAA |
Panel Type: |
STN-LCD , LCM |
Panel Size: |
7 inch |
Resolution: |
800*480 |
Display Mode: |
STN , Yellow/Green (Positive), Reflective |
Active Area: |
152.4x91.44 mm |
Outline: |
165x106x10.5 mm |
Surface: |
Anti-glare |
Brightness: |
400nits |
Viewing Angle: |
65/65/45/60 |
Lamp Type: |
CCFL |
Signal Interface: |
COMS 6bit 30pin |
Input Voltage: |
3.3 V (Typ.) |
Application: |
Industrial |
3.Detail of the LCD Module TX18D11VM1CAA Original 7" STN LCD
4.Why purchase from Hongkong Chance Technology CO., LTD?
Merchandise safekeeping: Planned and organized storage space for safekeeping of your merchandise.
Quality Thresholds: Precise standard operation procedure (SOP) that ensures the quality of your merchandise.
Safe transportation: Fast and safe transportation that ensures safety of your merchandise.
Technology advancement: Professional field applicatoin engineers (FAE) act as your exclusive technical consultant.
5.PACKAGING of LCD Module TX18D11VM1CAA Original 7" STN LCD
5.1Immediately wipe off saliva or water drop attached on the display area because its long period adherence may cause deformation or faded color on the spot.
5.2As the adhesives used for adhering polarizers are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, toluene ,ethanol and isopropyl alcohol.
5.3Lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. To prevent the display surface from damage and keep the appearance in goodstate, it is sufficient, in general, to wipe it with absorbent cotton.
6.CAUTION FOR OPAERATION of LCD Module TX18D11VM1CAA Original 7" STN LCD
1)If the display area is pushed hard during operation, some font will be abnormallydisplayed but it resumes normal condition after turning off once.
2)Placing in a dark place where neither exposure to direct sunlight nor light is , keeping temperature in the range from 0 ℃ to 35 ℃.
3)Response time will be extremely delayed at lower temperature than the operating temperature range and on the other hand at higher temperature LCDs show dark blue color in them. However those phenomena do not
7.How we do business
8.Quality Assurance of Display Panel
If you're looking for the koe 7.0" tft lcd module tx18d11vm1caa transmissive tn display landscape type with ccfl backlight, welcome to check datasheet with us. As one of the professional China suppliers in this field, we will also offer you the PDF display. Now, please be free to buy the quality products in stock with reasonable price from us.